Toa N-8000 Series - Manual (Page 59)

1-42
Chapter 1 GENERAL DESCRIPTION
10. Talk key
Press this key to broadcast a voice announcement
and conversation.
If the Talk key is set to "PTT" ("press-to-talk")
mode, then it must be pressed continuously for the
duration of the broadcast. If the Talk key is set to
"Lock" mode, then it must be pressed once to turn
the microphone on at the beginning of a broadcast,
then pressed again to turn the microphone off
once the broadcast is finished. The microphone
can also be set to sound a chime at the beginning
and/or end of each broadcast. The Talk key mode
("PTT" or "Lock") and the chime function are set
using the N-8000 Setting Software.
11. Function keys (L1 – L3)
Positioned in top-down order (L1, L2, L3). These
keys operate in the same manner as the Function
keys (R1 – R10) (No. 9).
12. Broadcast status indicator (orange/green/red)
Lights, flashes, or goes off depending on the
current operation state of the Talk key.
13. Microphone indicator (green)
Lights or goes off depending on the current
operation state of the Talk key.
Flashes while the chime is being activated.
[Side]
EXTEN
SION
14
14. RM-210 extension connector
This port is used to connect RM-210 extension
units.