Toa N-8000 Series - Manual (Page 630)

8-30
Chapter 8 APPENDIX
5.17. N-8650DS IP Door Station
Note: The design and specifications are subject to change without notice for improvement.
UNC No.6-32 x 20 ................................................. 4
Machine screw M4 x 20 ......................................... 4
LAN coupler .......................................................... 1
• Accessories
Back box: YC-150 (For flush mounting)
Wall-mount Box: YS-13A (For surface mounting)
AC adapter: AD-1210P or AD-1215P
• Optional products
Power Source Power supply device that complies with IEEE802.3af standard or
12 V DC (supplied from the AC adapter)
Power Consumption Use of the AC adapter (12 V DC): 3.5 W (station only)
Use of the PoE (48 V DC): 5 W
Speech Method Hands-free conversation
Audio Frequency Range 300 Hz – 7 kHz
Hands-free Speaker: 3.5 cm cone-type, maximum output 0.5 W, 8 Ω
Microphone: Omni-directional electret condenser microphone
Contact Input 1 channel, no-voltage make contact input, open circuit voltage: 5 V DC,
short circuit current: 10 mA or less, unterminated ends
Contact Output Open collector output, withstand voltage: 30 V DC,
control current: Max. 50 mA (4 output 1 COMMON) unterminated ends
Relay contact output, 1 channel, withstand voltage: 30 V DC,
control current: Max. 500 mA, unterminated ends
External Speaker Terminal Maximum output 0.5 W, 8 Ω, unterminated ends
Network Section
Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio Packet Transmission
System
Unicast, Multicast
Number of Paging
Destinations
0
Note: Reception only
Connector RJ-45 connector (PoE compatible)
Voice Sampling Frequency 16 kHz, 8 kHz (controllable on the software)
Quantifying Bit Number 16-bit
Voice Encoding Method Sub-band ADPCM, Cryptosystem
Voice Packet Loss Recovery Silence insertion
Audio Delay Time 80 ms, 320 ms (controllable on the software)
Indication Status indicator (built in the Call button)
Installation Method Flush-mount/Surface-mount
Operating Temperature –10 to +50 °C
Operating Humidity Under 90 % RH (no condensation)
Housing Protection BS EN62262: 2002: IK02 equivalent
Dust/Water Protection IP65 (Note that panel edges must be sealed at installation.)
Finish ABS resin, dark gray
Dimensions 116 (w) x 162 (h) x 60 (d) mm
Weight 400 g