Toa N-8000 Series - Manual (Page 204)

2-93
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
2. FUNCTIONS ENABLED WITH THE REMOTE MICROPHONE STATION
Function
Operation
(reference page)
Remarks
Functions available
exclusively for
the Remote
microphone station
(or functions to
be performed
exclusively)
Calling (Station number) p. 2-95 Assign each individual
function other than a
dial key to the function
key.
Sequential response p. 2-96
Selective response p. 2-97
End of conversation p. 2-95, 2-96, 2-97
Paging p. 2-102
Station speaker volume change p. 2-98
Dial pattern start p. 2-100
Privacy p. 2-101
Selected zone broadcast p. 2-106
Mic indicator p. 2-115
General broadcast pattern start p. 2-110
BGM pattern change/end p. 2-111
Control output activation p. 2-111
Multi-operation Activation p. 2-112
Same functions as
those available for
the Master station
Calling (Individual calls) p. 2-2 When a dial key has
been assigned to
the function key, it is
possible to realize
functions described at
left which are the same
ones available for the
master station.
One-touch dialing p. 2-100
Hold p. 2-14
Call transfer p. 2-15
Automatic transfer p. 2-17
Remote response
(Sequential response)
p. 2-22
Executive priority
(Sequential response)
p. 2-24
Paging p. 2-25
Paging response p. 2-31
Scan monitor p. 2-44
Same functions as
those available for
the N-8600MS IP
Master station
Dial pattern start p. 2-13 When a dial key has
been assigned to
the function key, it is
possible to realize
functions described at
left which are the same
ones available for the
N-8600MS IP Master
station.
SX-2000 selected zone broadcast p. 2-33
SX-2000 General-purpose broadcast
(General broadcast pattern start/end)
p. 2-34
SX-2000 BGM broadcast (BGM pattern
change/end)
p. 2-35
SX-2000 Control output activation/
deactivation
p. 2-37
Multi-operation activation p. 2-39