Toa N-8000 Series - Manual (Page 634)

8-34
Chapter 8 APPENDIX
5.22. RS-170 Outdoor Vandal-Resistant Substation
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
UNC No.6 x 18 ....................................................... 4
Machine screw M4 x 25 ......................................... 4
5.23. RS-180 Emergency Substation
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
UNC No.6 x 18 ....................................................... 4
Machine screw M4 x 25 ......................................... 4
Rated Input 1 W
Rated Impedance 625 Ω (1 W/25 V)
Internal Speaker 4 cm cone-type
Wiring 2-core shielded cable
Transmission Range 500 m/ø0.5 mm (AWG24)
800 m/ø0.65 mm (AWG22)
1300 m/ø0.9 mm (AWG19)
Operating Temperature –10 to +50°C (Temperature range not to freeze the speaker and switch)
Finish Panel: Stainless steel, hairline
Call button: Metal
Printed circuit board: Weather-resistant coating
Dimensions 120 (w) x 120 (h) x 57.5 (d) mm
Weight 540 g
Applicable Box (option) For flush-mount: 2-gang electrical box YC-302
For surface-mount: Indoor wall-mount box YC-822
Outdoor wall-mount box YC-823
Rated Input 1 W
Rated Impedance 625 Ω (1 W/25 V)
Internal Speaker 4 cm cone-type
Control Output Open collector, Withstand voltage: 30 V DC, Control current: 30 mA
(The open collector output is kept turned on till the conversation
is finished after the call button was pressed.)
Wiring 2-core shielded cable
Transmission Range 500 m/ø0.5 mm (AWG24)
800 m/ø0.65 mm (AWG22)
1300 m/ø0.9 mm (AWG19)
Operating Temperature –10 to +50°C (Temperature range not to freeze the speaker and switch)
Finish Panel: Stainless steel, hairline
Call button: Metal
Printed circuit board: Weather-resistant coating
Dimensions 120 (w) x 120 (h) x 58.5 (d) mm
Weight 570 g
Applicable Box (option) For flush-mount: 2-gang electrical box YC-302
For surface-mount: Indoor wall-mount box YC-822
Outdoor wall-mount box YC-823