Outline of settings using browser, Menu items – Toa N-8000 Series User Manual
Page 549
6-2
Chapter 6
SYSTEM SETTINGS USING THE BROWSER
1. OUTlINE Of SETTINGS USING BROWSER
Network settings can be updated and maintenance functions controlled by connecting to all exchanges, various
kinds of interface units and IP stations in the system via the PC's browser*. If an exchange, interface unit or
IP station is not within range for the PC to administrate broadcast communications, use another PC to enable
communications with all exchanges, various kinds of interface units and IP stations in the system.
* Recommended Windows browser: Internet Explorer 6/Internet Explorer 7/Internet Explorer 8
Notes
• Not all settings can be performed via the browser. After updating the network settings, add the exchange or
various kinds of interface units manually using a PC installed with the N-8000 Software, then perform the
required settings. (refer to
and
• In the factory settings, the same IP address may be duplicated or the PC and the exchange, interface unit
or IP station may not be set to the same network. When using the browser to perform network settings,
either connect only one the exchange, interface unit or IP station within the same network or disconnect the
equipment and the PC to be set from the network, and connect them directly using an Ethernet crossing
cable.
• CAUTION: If the power supply is shut off during setting change, this may cause a system failure.
• Updated settings become valid only after the equipment is restarted. Be sure to restart the equipment if
settings are changed. Conversations and paging currently in progress will be temporarily interrupted while
the equipment restarts.
2. MENU ITEMS
Network Setting (refer to
p. 6-5
)
Operation Status (refer to
p. 6-6
)
Line Status (refer to
p. 6-26)
Network Status (refer to
p. 6-31
)
Operation Log (refer to
)
Stream Log (refer to
)
System Management (refer to
)
Menu
Changes the IP address, subnet mask, and
default gateway of the exchange, interface
unit or IP station connected to the PC.
Displays usage conditions of speech links,
lines, contacts, call-in, etc.
This setting is applicable to the exchange
andSub-station interface unit only.
Displays the line status.
Displays the connection status for all exchanges,
various kinds of interface units and IP stations
within the system.
Displays the exchange, interface unit or IP station
operation logs.
Displays a log of the IP network’s audio
communications.
Used to change passwords and handle uploads
and downloads of settings files.
Note
This System Management menu is used to
maintain the exchanges, various kinds of interface
units, or IP stations for which system and function
settings have been completed by using the
supplied N-8000 Setting Software.