Toa N-8000 Series - Manual (Page 126)

2-15
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
2.5. Call Transfer
Either party engaged in two-party conversation can call the third party to make conversation with (placing the
original conversation partner on hold). After the conversation end, it is possible to restore the original two-party
conversation or transfer the conversation with the third party to the original conversation partner.
Note
The stations connected to the N-8010EX/8400RS cannot transfer the calls.
Step 1. Press the Transfer key during two-party conversation.
The current conversation is placed on hold, sending a hold tone to the other party.
Step 2. Dial the third party's station number, for example [6][3]. If the third party answers, the first party can
speak with the third party while keeping the original conversation on hold.
No. 61
No. 61
No. 62
No. 63
No. 61 No. 62
On hold
The second party
The second party
The third party
The first party
The first party
Dial the third party's station number.
6 3
Holding tone
After completing the conversation with the third party, the first party can transfer the original conversation to the
third party or return to the original conversation, as described on the next page.