Toa N-8000 Series - Manual (Page 404)

4-16
Chapter 4 SYSTEM DESIGN FLOW
5.7. C/O Interface
Side TAB Item Default
Reference
page
Network settings IP address * 1, 2 192.168.1.1
SW: p. 5-58
BR: p. 6-5
Subnet Mask * 1, 2 255.255.255.0
Default Gateway * 1, 2 0.0.0.0
Web server port number * 1, 2 80 SW: p. 5-86
BR: p. 6-5
TCP start port number 5000
p. 5-86
UDP start port number 5006
Multicast port number 6000
NAPT compatible Incompatible
Network ID 1
p. 5-87
WAN IP address 192.168.1.1
WAN Web server port number 80
WAN TCP start port number 5000
WAN UDP start port number 5006
Broadcast specification High quality sound
transmission mode p. 5-88
Communication capacity 2990 kbps
Function Settings 1 Control output / MI/DI equipment No.
-
p. 5-89
Control output / Contact output No.
-
Record conversation OFF
Record conversation AF No.
-
Access to paging call operation OFF
Access to scan monitor operation OFF
External equipment control OFF
Function Settings 2 C/O Name
-
p. 5-90
Timeout 5 minutes
Scan monitor timeout 5 minutes
Paging time-out No limit
Call/Transfer Access No.
-
Dial of transfer to
-
Access to direct in dial OFF
Access to direct in line OFF
Direct in line Leader
-
Direct in line Member
-
Paging with call tone ON
p. 5-91 Delay time 0
C/O control password enable ON
Scan Monitor Scan monitor sequencing time 3 seconds
p. 5-92 Monitor Alert None
Scan monitor group
-
• All of the above items can be set on the N-8000 Setting Software.
* 1 Be sure to set this since settings and conversations are performed via a network.
* 2 Settings possible from a browser as well.