Toa N-8000 Series - Manual (Page 147)

2-36
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
4.3.2. Termination
Step 1. Press the Function key.
Step 2. Select the control pattern to which a BGM pattern end function is assigned.
Press the following keys in order.
Multiple control patterns can be sequentially selected by repeating above key operation.
Step 3. Press the [ ] key.
The set BGM pattern or patterns are selected and terminated.
Note
Set the SX-2000 system ID using the supplied N-8000 Setting Software. (Refer to p. 5-28 .)
X X 5 Y Y Y
SX-2000 system ID
number (01 – 08)
Control pattern number*
(001 – 162)
* The pattern number having been set using the N-8000 Setting Software.