Toa N-8000 Series - Manual (Page 192)

2-81
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
5.12. IP Door Station's Speaker Output Switching Control
(only when the N-8640DS/8650DS is used)
The audio output destination of the N-8640DS/8650DS IP door station engaged in conversations with its master
station can be switched to either the internal speaker or the speaker connected to the external speaker terminal
by the master station's dial operation.
The switched audio output destination reverts to the speaker designated on the N-8000 Setting Software when
the conversations terminate or when interrupted by paging with higher priority.
Notes
• If the called IP door station does not have this function, an error tone sounds at the master station that made
a dial operation, and the state returns to the conversation mode.
• The internal and external speakers cannot be used simultaneously.
N-8640DS/8650DS
Speaker output
switching control
Operate the master station during conversation.
0
N-8640DS/8650DS
Speaker output
switching control
Operate the master station during conversation.
1
5.12.2. When switching to the internal speaker
5.12.1. When switching to the external speaker