Toa N-8000 Series - Manual (Page 125)

2-14
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
2.4. Hold
2.4.1. Mic off
Disabling the microphone during a conversation places the line on hold.
[Mic off]
Hold down any key of [0] through [9] continuously
during a conversation.
[Mic off release]
If the key being held down is released, the original
conversation mode is restored.
2.4.2. Call hold
Calls during conversations can be placed on hold.
[Hold]
When the Hold key is pressed during conversations,
a hold tone is heard at both parties, placing the
conversation on hold.
If the handset is replaced with Hold key is pressed, the
conversation is not terminated.
[Hold release]
If the Hold key is pressed again, the hold mode is
cancelled, and the original conversation mode is
restored.
If the call is on hold with the handset on hook, only
lifting the handset cancels the hold mode.
Release the key hold down.
Conversation
Mic off
Receiving call
0
0
Conversation
Holding tone
Holding tone
Hold
[Example]