Specifications, N-8000ex ip intercom exchange – Toa N-8000 Series User Manual
Page 615

8-15
Chapter 8
APPENDIX
5. SPECIFICATIONS
5.1. N-8000EX IP Intercom Exchange
• Accessories
AC power cord (2 m) .............................................. 1
CD (for PC setting, maintenance use) ................... 1
Removable terminal plug (4 pins) .......................... 2
Mini-clamp connector (2 pins) ............................. 20
Plastic foot ............................................................. 4
Machine screw M4 x 20 ......................................... 4
Rack mounting bracket .......................................... 2
Tapping screw 3 x 8 .............................................. 8
Rack mounting screw with plain washer ............... 4
Wall mounting bracket ........................................... 2
Wood screw 3.5 x 20 ............................................. 4
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
Power Source
CE version: 230 V AC, 50/60 Hz
CU version: 120 V AC, 50/60 Hz
Power Consumption
50 W (at rated), 75 W (max.)
Interface Section for Station
Number of Lines
16 lines
Number of Speech Links
Internal: 1/External: 2
Type of Speech Path
Space sharing/Time Space sharing
Transmission System
2 wire 160 kbps echo canceller transmission system
Signal Level
0 dB* or less
Transmission Range
Max. 1500 m (ø0.65 mm, Loop resistance 170 Ω)
Speech Method
Simultaneous conversation by way of echo canceller (Hands-free),
Simultaneous conversation by way of echo canceller or
Half-duplex conversation by way of voice switch (Handset),
PTT conversation
Connector
Dedicated connector
Wiring Method
1 set of twisted pair cable
Feeding Voltage/Current
48 V DC, Max. 70 mA
Paging Output
Audio
2 channels, Max. 0 dB*, 600 Ω, balanced
Control
2 channels, relay contact output, contact capacity: 24 V DC/0.5 A
Connector
Removable terminal block
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio Packet Transmission
System
Unicast, Multicast
Number of Paging
Destinations
Unicast (max. 16), Multicast (max. 191)
Connector
RJ-45 connector
Voice Sampling Frequency
16 kHz, 8 kHz (controllable on the software)
Quantifying Bit Number
16-bit
Voice Encoding Method
Sub-band ADPCM, Cryptosystem
Voice Packet Loss Recovery Silence insertion
Audio Delay Time
80 ms, 320 ms (controllable on the software)
Indication
LNK/ACT indicator, Status indicator, Power indicator
Others
Firmware update function, System date hold function, Reset key
(front panel), Forced air cooling, Time of day hold facility
Installation Method
Rack, Desk, Surface mount
Operating Temperature
0 to 40 °C
Operating Humidity
90 % RH or less (no condensation)
Finish
Pre-coated steel plate, black, 30 % gloss
Dimensions
420 (w) x 44.3 (h) x 356 (d) mm
Weight
4.1 kg