Toa N-8000 Series - Manual (Page 194)

2-83
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
6. MASTER STATION OPERATION TABLE
Call
Response (Sequential response mode)
Response
(Selective
response mode)
Conversation
Auto-dialing
One-touch
dialing
Dial pattern
activation
Hold
Call transfer
Call
forwarding
Time-based
call forwarding
Absence
transfer
Group
hunting
Call
Redialing
Recall
Voice Calling
Call station display
selection
First call station display
Last call station display
Selective response
Handset conversation
Hands-free conversation
PTT conversation
Operation
Operation
Programming
Erasure
Operation
Mic Off
Call hold
Call hold release
Call transfer
Returning to the
original conversation
Programming
at your station
Erasure at your station
Programming
at the designated station
Programming
Erasure
Programming
Erasure
Programming
Erasure
Dial station No. [X][X] ··· [X]
Press the [Redial] key
Press the [ ] key
Voice a call to a called party by pressing the [PTT] key as the
continuous call tone sounds.
Press any key or lift the handset.
Press the [ ] or [ ] key. (Arrow key)
Press the [ ] key. (Arrow key)
Press the [ ] key. (Arrow key)
Press the [PTT] key, or lift the handset.
Conversation can be made by lifting the handset.
Conversation can be made without lifting the handset.
Press the [PTT] key during a hands-free conversation.
Press the Auto-dialing key ( [1] – [8].)
Press [7] , [8] , [9] , [0] or lift the handset.
Dial [Function] [6] [the one-touch dialing key] [the dial to
be programmed] [PTT] keys.
• The one-touch dialing key represents the [7], [8], [9], [0],
or [PTT] key, which is used for one-touch function.
• Press the [PTT] key when enabling the Off-Hook
function for one-touch key operation.
• The dial to be programmed is up to 32 digits.
• Enter one-touch dialing key using the Dial keys (12 keys),
Paging key, Paging response key, Transfer key, and/or
Function key.
Dial [Function] [6] [the one-touch dialing key ] [PTT] keys.
Dial [Function] [2] [Function] [dial pattern No.] keys.
Continuously hold down any key ( [0] – [9] ) during a
conversation.
Press the [Hold] key during a conversation.
Press the [Hold] key during hold.
Press the [Transfer] key during a conversation.
The other party is placed on hold.
Dial the third party's station number.
Conversation with the third party.
(Original conversation party is placed on hold).
Either press the [C] key or replace the handset.
Call transfer completion
Press the [Transfer] key during a conversation.
The other party is placed on hold.
Dial the third party's station number.
Conversation with the third party.
(The original conversation party is placed on hold).
Press the [Transfer] key again.
Return to the original conversation.
(The original conversation is restored).
Dial [Function] [4] [1] [the designated station No.] [ ] keys.
Dial [Function] [4] [1] [your station No.] [ ] keys.
Dial [Function] [4] [2] [your station No.] [ ] keys.
Dial [Function] [4] [3] [the designated station No.] [ ] keys.
Dial [Function] [4] [3] [your station No.] [ ] keys.
Dial [Function] [4] [4] [the designated station No.] [ ] keys.
Dial [Function] [4] [4] [your station No.] [ ] keys.
Dial [Function] [4] [5] [the designated station No.] [ ] keys.
Dial [Function] [4] [5] [your station No.] [ ] keys.
Station No: 2 – 6 digits
N-8000MS/8500MS
/8600MS only
N-8600MS only
Dial pattern No.: 01 – 54
Station No: 2 – 6 digits
Function Item Operation Remarks
Speed dialing
Automatic call transfer