Toa N-8000 Series - Manual (Page 239)

2-128
Chapter 2 FUNCTIONS AND OPERATION
SUBSTATION/SWITCH PANEL'S FUNCTIONS AND OPERATION
3. RECEIVING A CALL
Step 1. When receiving a call from the master station, the call tone
sounds only once, after which the calling party's voice is
heard immediately through the internal speaker.
Step 2. Speak toward into the door station.
Note
Lifting the handset permits handset conversation when the
RS-141 is combined with the RS-140, or when the RS-481 is
combined with the RS-442/480.
Step 3. Terminate the conversation.
Conversation is terminated if the called party replaces the
handset or presses the Clear key.
Tip
Replacing the handset terminates the conversation when
the handset conversations are made using the RS-141 in
combination with the RS-140/142/143/144, or using the RS-
481 in combination with the RS-442/480.
Note
Conversation cannot be terminated at the substation, except for handset conversations made
from the RS-140/143/144 (Switch Panel)/142 (Switch Board)/RS-141 (Optional Handset) or RS-442
(Switch Board)/480 (Substation)/RS-481 (Optional Handset) Combined Substation. Conversations
are terminated by the termination operation at the master station or telephone or when the preset
conversation time elapses.
4. NOTE ON RECEIVING PAGING CALLS
Do not lift the handset during paging calls only when the N-8010RS Substation Interface Unit, RS-140/142/143/144
Switch Panel, and RS-141 Option Handset are used in combination.
Paging calls cannot be correctly heard if the handset is lifted.
Flashes
Brief call tone Voice
Steady-on
Paging calls
N-8010RS
RS-141 RS-140