Toa N-8000 Series User Manual
Page 85
1-68
Chapter 1
GENERAL DESCRIPTION
Function
Description
Reference page
Operation Setting
Paging
Zone paging
Calls can be made to one of the preprogrammed zones.
Selectable
paging
Calls can be made to up to 50 zones of the
preprogrammed multiple zones.
Selectable
paging to
individual zones
or the zones set
by a zone pattern
(N-8600MS only)
Calls can be made by selecting a zone or zone pattern
from the preprogrammed areas (zones).
All-call paging
Calls can be made simultaneously to all of the
preprogrammed zones.
Emergency
paging
Terminates all conversations, paging calls and other
operations that are currently in progress within the
system, allowing announcements to be simultaneously
made to all stations and all units preprogrammed to
receive paging calls.
Message paging
Recorded Messages can be broadcast through either
IP Master Station key operation or remote activation of
the IP Master Station by control signals from external
connected equipment. The contact outputs of the Multi
Interface Unit, Direct Select Unit, and Audio Interface
Unit can be made to close in synchronization with the
activation of the Message paging.
Paging
response
Automatic
response
Dialing the Paging Response key automatically initiates
a response to the paging last received.
Zone number
designation
paging
Dialing the number assigned to paging response
automatically initiates a response to a next-to-last
paging.
Broadcast
to SX-2000
system
(N-8600MS
only, only
when SX-
200IP is
used)
Selected zone
broadcast
Broadcasts can be made to the SX-2000 system zones.
General-purpose
broadcast
The General broadcast pattern having been set in the
SX-2000 system can be activated.
BGM broadcast
The BGM pattern having been set in the SX-2000
system can be activated.
Control output
activation
The control output of the SX-2000 system can be
activated.
Multi-operation
activation
Multiple operations including the SX-2000 selected zone
broadcast, SX-2000 system’s control output pattern
activation, and N-8000 paging can be performed at the
same time.
Other
functions
Scan monitor
The ambient audio of multiple preprogrammed stations
can be monitored in preprogrammed sequence from
the station. Designating the stations by operation of
the master station also permits them to be monitored in
designated sequence.
Three-party
conference
Simultaneous three-party handset conference calls can
be held by calling other Master Stations in sequence.