Toa N-8000 Series - Manual (Page 177)

2-66
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
[Calls to stations set for outside line Time-based Call forwarding]
Step 1. When the preset transfer time is reached, the
station's display shows the station (e.g. No. 62)
has entered the Time-based Call forwarding mode
(N-8000MS/8500MS/8600MS only).
Step 2. Calls to the original station are automatically
transferred to the transfer destination outside line
telephone without sounding a call tone.
No. 61
No. 62
Transfer destination C/O line telephone
Call tone
6 2
Original station number
0:00
12:00
6:00
8:00
18:00
16:00
Transfer time
zone
End time Start time
Programming or erasure can be performed at your station.
[Programming]
X + +
C/O interface unit access number
(1-digit or 2-digit)
(Confirmation tone) 4 +
Function designation
number
+ 3
[Erasure]
Z Z + (Confirmation tone)
The originally called
(your) station number
4 +
Function designation
number
+ 3
Note
The programmed contents set by dialing operation are automatically saved into the exchange or IP
stations at midnight every day. If the exchange or IP station is turned off before completion of save, the
state returns to the contents that were programmed before power-off.
C O T 0 0 1 : C O - L i n e 1
6 2
Transfer destination
N-8000CO’s equipment number
Transfer destination
N-8000CO’s name
Original station number