Toa N-8000 Series - Manual (Page 286)

2-175
Chapter 2 FUNCTIONS AND OPERATION
OPERATION FROM AN OUTSIDE LINE
3 A Z Z
3 3
3 4
3 5
3 6
3 7
X X Y Y Y Y
To control the contact output 1
To control the contact output 2
To control the contact output 3
To control the contact output 4
To control the contact output 5
N-8000CO's
outside line number
(Dial
confirmation tone)
Function designation number
Outside line
control password
Door station No.
(2 – 6 digits)
+ + +
+ +
+ +
+ +
+ +
+ +
+ + +
[Door station one-shot make output operation (N-8640DS/8650DS is used.)]
The N-8640DS/8650DS has 5 contact outputs. Function designation number differs depending on the contact
output to be controlled.
First dial the N-8000CO interface's outside line number and confirm that a dial confirmation tone is heard, and
then dial [Function designation number]+[4-digit outside line control password]+[door station number to be
controlled].
Note
A confirmation tone (ding-dong) is sounded after operation acceptance. The line is automatically cut off after
the confirmation tone stops.