Toa N-8000 Series - Manual (Page 267)

2-156
Chapter 2 FUNCTIONS AND OPERATION
N-8000AL TELEPHONE INTERFACE CONNECTED TELEPHONE
4.5. Access Code Authentication
Usage of the telephone can be restricted when the access code authentication is enabled.
Entering a preprogrammed 4-digit access code number before each function key number permits the telephone
to be used as usual. Incorrect access code number entry will cause an access error.
Following are restricted functions: Functions to activate at the telephone such as calls, paging calls and scan
monitoring, and functions to control through dial operations such as external equipment control and setting
change for the original telephone.
Call receiving can be executed without the need for access code number entry.
Emergency paging call activation function, which has higher priority, can be used without entering an access
code number.
Operation not in standby mode such as manual call transfer during conversation can be executed without
entering an access code number.
Tip: Use the supplied N-8000 Setting Software for access code authentication and access code number
setting. (See p. 5-100 )
4.5.1. Operation
The steps below show an example of making station call when access code authentication is enabled.
Step 1. Press the access code number
(4-digit number).
Step 2. Press the station number to call.
(Access code number: Example when the password is 1234)
(Example when station number is 15)
1 2 3 4
1 5