Toa N-8000 Series - Manual (Page 116)

2-5
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
1.4. Station Speaker Volume
The master station speaker volume can be preset using the supplied N-8000 Setting Software, however it can
also be adjusted at the station.
When using the master station other than the N-8410MS:
• The speaker volume level can be changed in 5 steps (in 3 dB per step).
• Pressing the [ ] key during conversation increases the volume.
• Pressing the [ ] key during conversation decreases the volume.
Note
The changed volume level is maintained even after conversation is
finished.
When using the N-8410MS:
The station speaker volume cannot be adjusted with key operation.
• Hands-free speaker volume can be adjusted using the station's rear-mounted hands-free speaker volume
control switch.
Its output level can be changed in 3 steps (in 4 dB per step).
• Handset speaker volume can be adjusted using the station's rear-mounted handset speaker volume control
dial.
Hands-free speaker volume control switch
N-8410MS
Handset speaker volume control dial