Toa N-8000 Series User Manual
Packet intercom system n-8000 series
Table of contents
Document Outline
- 1. SAFETY PRECAUTIONSFor N-8000EX/8010EX/8000RS/8010RS/8400RS/8000MI/8000DI/8000AF/8000CO/8000AL
- Chapter 1 : GENERAL DESCRIPTION
- Chapter 2 : FUNCTIONS AND OPERATION
- MASTER STATION'SFUNCTIONS AND OPERATION
- 1. BASIC USAGE
- 2. CONVERSATION FUNCTIONS AND OPERATION
- 2.1. Calling
- 2.2. Setting Call Receiving Modes
- (only when the system is set to "Sequential Response" mode)
- 2.3. Speed Dialing
- 2.4. Hold
- 2.5. Call Transfer
- 2.6. Automatic Transfer
- 2.7. Remote Response (only when the system is set to "Sequential Response" mode)
- 2.8. Executive Priority (only when the system is set to "Sequential Response" mode)
- 3. PAGING FUNCTION AND OPERATION
- 4. BROADCAST TO SX-2000 SYSTEM (N-8600MS only, only when SX-200IP is used)
- 5. other FUNCTIONS AND OPERATION
- 5.1. Scan Monitor
- 5.2. Three-Party Conference
- 5.3. Time Signal (only when the N-8000AF is used)
- 5.4. PBX Connection (only when the N-8000MI is used)
- 5.5. Outside Line Connection (only when the N-8000CO is used)
- 5.6. Tie-Line Connection (only when the N-8000MI is used)
- 5.7. BGM (only when the N-8000MI is used)
- 5.8. External Equipment Control(only when the N-8000MI/8000DI/8000AF/8050DS/8540DS/8640DS/8650DS is used)
- 5.9. Door Remote Control(only when the N-8050DS/8540DS/8640DS/8650DS/8000MI/8000DI/8000AF is used)
- 5.10. Message Pagings (available only when IP Master Stations are used)
- 5.11. Audio Trigger Function Settings (only when the N-8050DS/8640DS/8650DS is used)
- 5.12. IP Door Station's Speaker Output Switching Control(only when the N-8640DS/8650DS is used)
- 5.13. Access Code Authentication (except N-8500MS/8510MS)
- 6. MASTER station Operation table
- 7. MULTIFUNCTIONAL MASTER STATION'S LCD DISPLAY TABLE
- REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
- 1. FUNCTIONS ASSIGNABLE TO THE FUNcTION KEY
- 2. FUNCTIONS ENABLED WITH THE REMOTE MICROPHONE STATION
- 3. FUNCTION COMPARISON TABLE BETWEEN N-8610RM AND RM-200SA
- 4. CONVERSATION FUNCTIONS AND OPERATION
- 5. USING THE PRIVACY FUNCTION
- 6. PAGING FUNCTION AND OPERATION
- 7. bROADCAST TO SX-2000 SYSTEM (only when using SX-200IP)
- 8. OTHER FUNCTIONS
- 9. REMOTE MICROPHONE STATION OPERATION TABLE
- DOOR STATION'SFUNCTIONS AND OPERATION
- 1. Calling from a door station
- 2. Making an EMERGENCY Call(only possible when system is set for "Selective Response")
- 3. Receiving a Call
- 4. Audio Trigger function (N-8050DS/8640DS/8650DS only)
- 5. Call button restriction (N-8050DS/8640DS/8650DS only)
- (Only when the system is used to "Sequential Response" mode)
- 6. DOOR station Operation table
- SUBSTATION/SWITCH PANEL'SFUNCTIONS AND OPERATION
- 1. Calling from a SUBstation
- 1.1. Operation Using the Call Button(when the system is set to "Sequential Response" mode)
- 1.2. Operation Using the Call Button(when the system is set to "Selective Response" mode)
- 1.3. Calling by Lifting the Handset (only when the RS-141 is combined withthe RS-140/142/143/144, and when the RS-481 is combined with the RS-442/480.)
- 2. Making an EMERGENCY Call(only when system response mode is set for "Selective Response")
- 3. Receiving a Call
- 4. NOTE ON RECEIVING PAGING CALLS
- 5. USING THE PRIVACY FUNCTION (RS-140 only)
- 6. CALL BUTTON RESTRICTION
- (Only when the system is used to "Sequential Response" mode)
- 7. SUBstation Operation table
- 1. Calling from a SUBstation
- N-8000AL TELEPHONE INTERFACECONNECTED TELEPHONE
- FUNCTIONS AND OPERATION
- 1. BASIC USAGE
- 2. CONVERSATION FUNCTIONS AND OPERATION
- 3. PAGING FUNCTION AND OPERATION
- 4. other FUNCTIONS AND OPERATION
- 4.1. Scan Monitor
- 4.2. External Equipment Control(only when the N-8000MI/8000DI/8000AF/8050DS/8540DS/8640DS/8650DS is used)
- 4.3. Door Remote Control(only when the N-8050DS/8540DS/8640DS/8650DS/8000MI/8000DI/8000AF is used)
- 4.4. IP Door Station's Speaker Output Switching Control(only when the N-8640DS/8650DS is used)
- 4.5. Access Code Authentication
- 5. Telephone Operation table
- OPERATION FROM AN OUTSIDE LINE
- OTHER FUNCTIONS(CONVENIENT FUNCTIONS)
- 1. Priorities
- 2. Time-Out
- 3. Recording (only when the N-8000AF is used)
- 4. Group Blocking
- 5. Paging Delay Output
- 6. Paging Pre-Announcement Tone Output Control
- 7. External Input Paging (only when the N-8000MI/8000AF is used)
- 8. Paging Sync Contact Output Control(only when the N-8000MI/8000AF is used)
- 9. Calling Station Indication/CCTV Interlock(only when the N-8000MI/8000DI/8000AF is used)
- 10. Outside line Calling Station Indication/CCTV Interlock(only when the N-8000CO/8000MI/8000DI/n8000AF is used)
- 11. Call/Conversation Sync Contact Output(only when the N-8050DS/8540DS/8640DS/8650DS is used)
- 12. IP DOOR STATION EXTERNAL CONTROL INPUT(only when the N-8640DS/8650Ds is used)
- 13. Remote Dial Control(only when the N-8000MI/8000DI is used)
- 14. Direct Select (only when the N-8000DI is used)
- 15. Contact Bridge Function(only when the N-8000MI/8000DI/8050DS/8540DS/8640DS/8650DS is used)
- 16. Paging Busy Input (only when the N-8000MI is used)
- 17. System Diagnosis (only when the N-8000MI/8000DI/8000AF is used)
- 18. Time Signal
- 19. Time correction
- 20. Automatic Daylight Saving Time (Summer time) Correction
- 21. NTP CLIENT FUNCTION (only when the N-8000AF is used)
- REMARKS
- MASTER STATION'SFUNCTIONS AND OPERATION
- Chapter 3 : INSTALLATION & WIRING
- 1. Installation of the Exchange
- 1.1. Equipment Rack Mounting
- 2. Installation of the sUBstation interface unit
- 3. INSTALLATION OF THE MULTI INTERFACE UNIT
- 4. INSTALLATION OF THE direct select UNIT
- 5. INSTALLATION OF THE Audio interface unit, c/o interface UNIT AND TELEPHONE interface unit
- 6. INSTALLATION OF THE IP MODULE
- 7. Installation of master Stations
- 8. INSTALLATION OF REMOTE MICROPHONE STATION
- 9. Installation of DOOr Stations
- 10. Installation of substations
- 11. Installation of switch panel
- 12. Installation of option handset
- 13. Wiring
- 13.1. Exchange Connection
- 13.2. Connections of Stations Used in conjunction with the Exchange
- 13.3. N-8000RS/8010RS Substation Interface Unit Connection
- 13.4. Connections of Stations Used in conjunction with the N-8000RS/8010RS
- 13.5. N-8400RS Substation Interface Unit Connection
- 13.6. Connections of Stations Used in conjunction with the N-8400RS
- 13.7. Multi Interface Unit Connection
- 13.8. Direct Select Unit Connection
- 13.9. Audio Interface Unit Connection
- 13.10. C/O Interface Unit Connection
- 13.11. Telephone Interface Unit Connection
- 13.12. IP Station Connection
- 13.13. Type of Cable
- 13.14. Relations Between Core Diameter of Cable and Maximum Cable Length
- 13.15. Connector Connection
- 1. Installation of the Exchange
- Chapter 4 : SYSTEM DESIGN FLOW
- Chapter 5 : SYSTEM SETTINGS BY SOFTWARE
- 1. N-8000 Setting Software General Description
- 1.1. General Description
- 2. Installing Software
- 2.1. System Requirements
- 2.2. Activating the Setup Guide
- 2.3. Required Component Installation (Except when the OS is Windows 8.1)
- 2.4. N-8000 Setting Software Installation
- 2.5. Operating the N-8000 Setting Software Program on Windows 8.1
- 2.6. N-8000 Setting Software Uninstallation
- 2.7. Folder Configuration
- 2.8. Version Update Information
- 3. Activating N-8000 Setting Software Program
- 4. Unit Scan (Network Settings)
- 5. System Setting function
- 5.1. Screen Description
- 5.2. Menu
- 5.3. Overall System Configuration Settings
- 5.4. Exchange Settings
- 5.5. Multi Interface Unit Settings
- 5.6. Setting Sub-station Interface
- 5.7. Setting IP Stations
- 5.8. Setting Stations Connected to the Exchange, and Analog Master Stations Connected to the Substation Interface Unit
- 5.9. Setting C/O Interface
- 5.10. Setting Telephone Interface
- 5.11. Setting Audio Interface
- 5.12. Setting Direct Select
- 5.13. Setting Gateway
- 5.14. Paging Zone Settings
- 5.15. Group Settings
- 6. When Settings Are Completed
- 7. System Clock Settings
- 8. message PAGING Settings
- 1. N-8000 Setting Software General Description
- Chapter 6 : SYSTEM SETTINGS USING THE BROWSER
- Chapter 7 : MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS/8500MS/8600MS only)
- Chapter 8 : APPENDIX
- 1. FULL DUPLEX AND HALF DUPLEX CONVERSATIONS
- 1.1. Speech Method
- 2. Basic Knowledge About Networks
- 2.1. IP Networks and Address
- 2.2. Network Address Port Translation (NAPT, IP Masquerade) and N-8000 Setting Software Program
- 2.3. Unicast vs. Multicast Communications
- 2.4. Network Paging Restrictions
- 2.5. Unit Scan and Broadcast Communications Domains
- 2.6. Sampling Frequency Correction (N-8000EX/8010EX/8000MI only)
- 2.7. NTP (Network Time Protocol)
- 3. If Trouble Occurs:
- 4. Indicator Status & Troubleshooting
- 5. Specifications
- 5.1. N-8000EX IP Intercom Exchange
- 5.2. N-8010EX IP Intercom Exchange
- 5.3. N-8000MS Multifunctional Master Station
- 5.4. N-8010MS Standard Master Station
- 5.5. N-8011MS Standard Hands-Free Master Station
- 5.6. N-8020MS Industrial-Use Master Station
- 5.7. N-8031MS Flush-Mount Master Station
- 5.8. RS-191 Option Handset
- 5.9. N-8033MS Flush-Mount Master Station
- 5.10. N-8050DS Door Station
- 5.11. N-8500MS IP Multifunctional Master Station
- 5.12. N-8510MS IP Standard Master Station
- 5.13. N-8600MS IP Multifunctional Master Station
- 5.14. N-8610RM IP Microphone Station
- 5.15. N-8540DS IP Door Station
- 5.16. N-8640DS IP Door Station
- 5.17. N-8650DS IP Door Station
- 5.18. N-8000RS Substation Interface Unit
- 5.19. N-8010RS Substation Interface Unit
- 5.20. RS-150 Indoor Substation
- 5.21. RS-160 Indoor Vandal-Resistant Substation
- 5.22. RS-170 Outdoor Vandal-Resistant Substation
- 5.23. RS-180 Emergency Substation
- 5.24. RS-140 Switch Panel
- 5.25. RS-141 Option Handset
- 5.26. RS-142 Switch Board
- 5.27. RS-143 Switch Panel
- 5.28. RS-144 Switch Panel
- 5.29. N-8400RS Substation Interface Unit
- 5.30. N-8410MS Analog Standard Master Station
- 5.31. RS-450 Indoor Substation
- 5.32. RS-460 Indoor Vandal-Resistant Substation
- 5.33. RS-470 Outdoor Vandal-Resistant Substation
- 5.34. RS-480 Emergency Substation
- 5.35. RS-442 Switch Board
- 5.36. RS-481 Option Handset
- 5.37. N-8000MI Multi Interface Unit
- 5.38. N-8000CO C/O Interface Unit
- 5.39. N-8000AF Audio Interface Unit
- 5.40. N-8000AL Telephone Interface Unit
- 5.41. N-8000DI Direct Select Unit
- 5.42. SX-200IP IP Module
- 5.43. YC-280 Wall Mounting Bracket
- 5.44. YC-290 Wall Mounting Bracket
- 5.45. YC-850 Wall Mounting Bracket
- 5.46. YC-241 Back Box
- 5.47. YC-251 Wall-Mount Box
- 5.48. YC-150 Back Box
- 5.50. YC-302 2-Gang Electrical Box
- 5.51. YC-801 Flush-Mount Box
- 5.52. YC-802 Wall-Mount Box
- 5.53. YC-822 Indoor Wall-Mount Box
- 5.54. YC-823 Outdoor Wall-Mount Box
- 5.55. YC-841 Back Box
- 5.56. E-7000TB Terminal Board
- 5.57. AD-1210P AC Adapter
- 5.58. AD-1215P AC Adapter
- 1. FULL DUPLEX AND HALF DUPLEX CONVERSATIONS