Toa N-8000 Series - Manual (Page 139)

2-28
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
3.1.4. All-call paging
Paging calls can be made simultaneously to all of the pre-programmed zones.
Use the supplied N-8000 Setting Software to set the paging zones. (Refer to p. 5-121 .)
Step 1. Press the Paging key, followed by the paging zone number "0" (for all-call paging).
A paging tone is transmitted to all zones.
Note
Enter a zone number with the digit length (1 − 3 digits) set with the N-8000 Setting Software.
Step 2. Page with the handset either lifted or in place.
Note
If the system's paging response mode has been set for Zone number designation response (refer to p.
2-32 ), notify the paged party to respond to [0] in the paging message.
Step 3. Either press the Clear key or replace the handset.
The paging is completed.
1
3
2
Zone 1
Amplifier
Speakers
No. 100
Zone 192
Amplifier
Speaker
or
C
or
0 0 0
(Zone number with 3-digit length)