Toa N-8000 Series - Manual (Page 593)

7-4
Chapter 7 MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS/8500MS/8600MS only)
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
1 0 : 0 8 A M
2 0 0 0
2 : L i n e m o n i t o r
O O O X O O O X X O O F F O O O
Step 1. Press the Menu key to place the display in setting
mode.
Step 2. Use the down arrow key or the [2] key to move the
cursor to "2: Line monitor."
Step 3. Press the Select key to display the connection status
for all sixteen lines. Lines are listed in order from left to
right as Line 1, Line 2, and so on up to Line 16.
3. MONITORINg LINE STATUS
Causes the station's LCD to display the connection status for all sixteen lines associated with the exchange to
which the N-8000MS is connected.
The N-8500MS/8600MS does not have the monitoring function.
Step 4. Press the Menu key to return the display to its normal
standby mode.
"No Information" is displayed on the N-8500MS/
8600MS's LCD.
Display symbol Contents Details
O Connected
(Normal)
Station is connected to the line and communications are being
performed correctly between the exchange and station.
X Unconnected Station is not connected to the line or a wire is broken.
F Connected
(Abnormal)
Station is connected to the line, but communications are not
being performed correctly.