Toa N-8000 Series - Manual (Page 122)

2-11
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
2.3. Speed Dialing
2.3.1. Auto-dialing (N-8000MS/8500MS/8600MS only)
When the dial operation (up to 20-digit numbers) is
preprogrammed into each station's Auto Dial key, such
programmed call can be made by simply pressing a single
key.
• Auto Dial keys can be programmed individually at each
station.
• The contents programmed into each Auto Dial key can
be confirmed at each station.
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
A u t o - d i a l 1 :
A u t o - d i a l 4 :
2 0 0 4
A u t o - d i a l 4 :
A u t o - d i a l 4 :
2 0 0 4
1 0 : 0 8 A M
2 0 0 0
X
4
or
[Example]
[Programming]
Step 1. Press the Menu key to set the display to Menu
mode.
Step 2. Press the Select key to set the display to auto-dial
programming mode, displaying the data already
programmed into the Auto Dial key 1.
Tips
• Use the Left and Right arrow keys to scroll the
display of programmed numbers with more than
15 digits.
• Since there are no factory program settings, the
display is initially blank.
Step 3. Select the desired Auto Dial key by pressing the
corresponding Auto Dial key directly or moving
the cursor using the Up and Down keys.
Step 4. Press the Select key to allow the contents
programmed into the selected Auto Dial key to be
edited.
Step 5. Dial keys (12 keys), Paging key, Paging response
key, Hold key, Transfer key, and Function key can
be used for programming into the Auto Dial keys.
Entering a number longer than 15 digits causes
the screen to scroll.
Step 6. Press the Select key to enter the number into the
program of the selected Auto Dial key. To continue
programming additional Auto Dial, return to Step
3 and repeat the process.
Step 7. Press the Menu key to return the screen to the
normal (standby) mode.
Call
1