Toa N-8000 Series - Manual (Page 226)

2-115
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
8. OTHER FUNCTIONS
8.1. Using the Shift Key
Following 2 different functions can be assigned to the Remote microphone station's key in advance: one
activated with a single key operation and another activated with key operation in conjunction with the Shift
key.
(Example)
For example, set a function for a single key operation to [Volume + (Volume increase)] and a function for
key operation in conjunction with the Shift key to [Volume − (Volume decrease)], then operate the keys as
follows.
• To increase the volume, press the [Volume +] key during
conversation.
• To decrease the volume, press both the [Volume −] key and
Shift key simultaneously during conversation.
8.2. Using the Microphone Indicator Function
The broadcast status indicator on the left side of the Talk key can be switched to act as a microphone
indicator.
Step 1. Press the Microphone indicator key.
The broadcast status indicator switches to the
microphone indicator.
Step 2. Speak into the microphone.
The broadcast status indicator flashes.
It flashes green when audio signals are input from the microphone. It flashes red when an over
peak level signal is input.
Step 3. Press the Microphone indicator key again.
The indicator reverts to its original broadcast
status indicator function.
[Volume −]
key
Shift key
Green
Selection indicator
[Volume +]
key
Green
Selection indicator
Microphone indicator
key
Green
(Lights only
when pressed)
Orange
Selection indicator
Status indicator
Flashes
green.
Green
Broadcast status indicator
(Microphone indicator)
Microphone indicator
Talk key
Microphone
indicator
Green
(Lights only
when pressed)
Selection indicator
Status indicator