Toa N-8000 Series - Manual (Page 179)

2-68
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
5.6.3. Making paging calls to another intercom system
Step 1. Press the tie-line access number.
The called intercom system can be connected.
Step 2. After confirming that a dial tone from the connected intercom system is heard, dial the paging operation
number of the connected intercom system, and make a paging call to the connected intercom system.
Note
Set the tie-line access number using the supplied N-8000 Setting Software. (Refer to p. 5-46 .)
Confirmation tone
Tie-line
access No.
Intercom system's
paging operation No.
X
Y Y
Another intercom system N-8000 system
Paging call
5.6.4. Being paged from another intercom system
Dialing the intercom access number, " " or " •," "8," and the N-8000 system's paging operation number in this
order at the other intercom system's station permits paging calls to be made to the N-8000 system.
The method for responding a paging call at the N-8000 system's station is the same as when it is paged from
the N-8000 system's station. (Note that paging response is valid only when the paging call is in progress.)
Note
The tie-line access number to be used by another intercom system's stations must be set at another intercom
system side.
Note
Paging calls cannot be made simultaneously over both the N-8000 system and other intercom systems.
Y
X X 8
Tie-line
access No.
Intercom system's
paging operation No.
Another intercom system N-8000 system
Paging call
or