Toa N-8000 Series - Manual (Page 423)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
5-13
3. ACTIVATING N-8000 SETTING SOFTWARE pROGRAM
Step 1. Double-click the shortcut icon created on the desk-top screen when installing, or double-click the
ConfigurationSoft.exe created in the installed folder directly.
[System Selection] screen is displayed.
Step 2. Select "System name", enter password, then press [OK].
Note
System name and password are case-sensitive.
To perform new system settings, select "New System," then enter the system name and press the "OK"
button.
System name and password are factory-preset to "N-8000" and "guest" respectively.
For changing System name or Password, refer to , .
(1) New System
Creates a new system.
Enter the system name to be created.
The password "guest" is set by default.
(2) Existing System
Selects one from the existing systems.
Enter a password after selecting the system
name.
(3) Import button
Reads system information from the pi8-formatted
file and saves it to the database.
Use this button when reading system information
created by another PC.
Note
If the system to be imported and that already
having been registered are the same in name, the
new system cannot be imported.
In this case, delete the existing system setting
data folder with the same name, and then perform
data import.
For details of the data folder, refer to p. 5-12