Grass Valley Zodiak v.6.0 Mar 15 2006 - Manual (Page 463)

Zodiak — User Manual 463
Using Still Store Loader
9. If not already properly selected, click the Video or Key check box in the
Image Select area.
• The Video setting is used for downloading standard stills, and will
download the image to the video portion of a video/key still.
• The Key setting will download the image to the key portion of a
video/key still.
10. If desired, you can have the target device fill any empty image area
with a matte color by clicking on the Background Select
Background Matte
radio button. See Using Background Matte on page 467 and for
instructions.
11. The Zodiak Stillstore in the Video Processor frame on the Menu
(Facility) LAN must be identified before you can download an image
to it. If the correct device is not displayed under Network Addresses,
you need to click on the
Configure button and identify the target. See
Selecting the Zodiak Stillstore Device on page 460 for instructions.
CAUTION Before actually downloading an image, be sure the existing Stillstore number
that has been selected is not in use, and it is OK to replace that image. The
download process overwrites the existing image during the transfer process.
12. Click OK when all the selections are complete. This will close the Image
Transfer dialog box and begin the transfer. The Image Transfer Status
bar indicates the progress of the transfer. The time involved depends
on the size of the image.
13. Upon a successful transfer, the message “Download completed OK”
appears. Click
OK to close this message box.
The Zodiak Stillstore checks for downloaded stills every ten seconds.
When the system detects a newly downloaded image, it is automatically
processed and will be available about two seconds later.
Uploading an Image From Zodiak Stillstore to PC
1. Go to the Still Store Loader Main menu.
2. Click on the Upload/Download button to go to the Image Transfer dialog
box.
3. Click on the Upload from Still Store radio button ( Figure 309 ).