Grass Valley Zodiak v.6.0 Mar 15 2006 - Manual (Page 447)

Zodiak — User Manual 447
Macros
3. Press the panel button that has the macro attached.
Removing a Macro Attachment
Using the Menu and the Main Panel
1. Go to the Macro Attach menu (touch Macro , Attach ).
2. Touch either the Pre Attach , Repl Attach , or Post Attach button. Any button
can be pressed. All attachments will be removed.
1. Touch the Show Attach button so that panel buttons with macros attached
blink low tally.
2. Without selecting a macro register, press the blinking button that has
the attachment you wish to remove. The blinking button will turn off.
3. Touch Show Attach to turn off the mode.
Using Only the Menu
1. Go to the Macro Attach menu (touch Macro , Attach ).
2. Touch either the M/E 1 , M/E 2 , M/E 3 , or Misc button.
3. Scroll through the list until a macro is displayed in the Pre, Replace, or
Post columns.
4. Touch the data pad for the displayed macro, the Macro Attach selection
menu will appear.
5. Touch the None button. The macro is removed.
Appending a Macro with the Main Panel Shortcut Button
1. With the Macro button illuminated, press the M/E 1 Rec shortcut reentry
button twice and hold it down after the second press.
2. Press the macro register button on the delegated keyer row of an
existing macro to which you wish to append additional steps.
3. Release the M/E 1 Rec shortcut button.
4. Perform the additional steps using the Main panel and/or the Menus.
5. Complete the append by pressing the blinking keyer row macro
register button.