Grass Valley Zodiak v.6.0 Mar 15 2006 - Manual (Page 380)

380 Zodiak — User Manual
Section 5 — System Operation
2. Press the E-MEM subpanel keypad number of the desired register.
Alternatively, you can press the Bank 0 or Bank 1 to select either of those
banks without using number and Enter keystrokes.
To Run an Effect
With Auto Run Off
1. Recall the desired effect.
2. Press Run .
With Auto Run On
1. Recall the desired effect. The effect will run as soon as it is recalled.
E-MEM Sequences
To Learn a Sequence of Registers
1. Press Learn , Seq .
2. Press the bank and register keypad buttons of the desired registers in
the order you wish them to run.If you wish you can add a delay time at
each register by pressing
Trans Rate and entering a time value.
3. Press Learn .
To Play a Sequence of Registers
1. Press Seq .
2. Press the bank and register keypad button of the starting register.
To Break a Sequence
1. Press Learn , Seq .
2. Press the bank and register keypad button of the register to end the
sequence.
3. Press the same bank and register button you just pressed.