Grass Valley Zodiak v.6.0 Mar 15 2006 - Manual (Page 249)

Zodiak — User Manual 249
Timeline Menus
Learn Mode Controls
When Learn mode is selected, the controls shown in Figure 171 become
available.
Figure 171. Timeline Menu - Recall Run - Learn Mode
The Effect Dissolve button is used to specify the setting of this attribute when
the register is learned.
Note This Effect Dissolve button does not report whether this attribute has been
saved to the currently selected register.
The Delay data pad allows a time value to be entered for the dissolve rate
between registers that will be learned to that register.
The Learn Modify button can be used to immediately change the Effect Dis-
solve setting (and other register settings) contained in the header informa-
tion of the currently selected register, without changing existing keyframe
data in that register (which would occur if a regular Learn were per-
formed).
Note Learn Modify will also change any other register header changes that may
have been made. E-MEM settings that are not keyframeable fall into this cat-
egory. Examples include DPM register number, P-BUS enables, etc.