E-mem prefs menu, 300 mode operation – Grass Valley Zodiak v.6.0 Mar 15 2006 User Manual
Page 392
392
Zodiak — User Manual
Section 5 — System Operation
E-MEM Prefs Menu
The Master E-MEM operating mode is selected on the E-MEM Prefs menu,
accessed via
Daily Setups
,
Suite Prefs
,
E-MEM Prefs
(
).
Figure 275. E-MEM Prefs Menu
300 Mode Operation
Use the following procedure to operate in Master E-MEM 300 Mode:
1.
Select 300 Mode by going to the E-MEM Prefs menu (touch
Daily Setup
s,
Suite Prefs
,
E-MEM Prefs
) and touching
300 Mode
. Alternatively, you can
recall a Suite Pref that was saved with this mode selected.
2.
Setup the first keyframe on one of the M/Es, press the individual
M/E’s E-MEM
Learn
button, then select the bank and register on that
subpanel to which you wish to save those settings.
3.
If that effect will have multiple keyframes, delegate the Master E-MEM
subpanel to only that M/E and edit the effect using keyframe editing,
Inserting, Deleting, and Modifying keyframes as required.
4.
for all the effects you plan to use on that M/E.
5.
Select a different M/E, and repeat the steps immediately above for all
the effects for that M/E. Continue until you have built all the effects on
all the M/Es you intend to use.