Grass Valley Zodiak v.6.0 Mar 15 2006 - Manual (Page 248)

248 Zodiak — User Manual
Section 4 — Menus Overview
The Sequence indicator goes green when a effect Sequence is underway.
Note The Effect Dissolve and Sequence indicators only report current activity. They
do not indicate whether these attributes have been learned in the currently
selected register.
Mode
The Mode pane selects which function will be performed with the other
buttons on the menu (Recall, Learn, Learn Sequence). Different buttons
become available on the menu depending on the mode selected.
Enable Groups
Like the Enable buttons on the Master E-MEM subpanel, the buttons in the
Enable Groups pane determines what levels will be affected by the func-
tion activated (Recall, Learn, Learn Seq).
Select All selects the remaining unselected buttons or deselects all the Enable
buttons in the pane.
Bank and Register Selection
The Bank and Register buttons act similar to the Master E-MEM keypad,
permitting the immediate selection of any of the 100 E-MEM registers.
Press a Bank button, if necessary, to change the bank, then press the Reg-
ister number button to select that register.
Effects Run Controls
The Stop Next , Rev , Rew , and Run buttons (available in Recall mode) perform
the same effect run functions as the similarly labeled buttons on the Effects
Run subpanel.
Other E-MEM Buttons and Knobs
The Auto Recall and Auto Run buttons (available in Recall and Learn modes)
perform the same functions as the similarly labeled buttons on the Master
E-MEM subpanel.
The Clear Cur Reg button (available in Recall mode) performs the same func-
tion as the Clear • Enter keystrokes on the Master E-MEM subpanel. It imme-
diately removes all the data from the currently selected register.
The Go to KF and Jog Effect knobs are used to navigate through the effect,
same as the Go to KF button and the Run Lever Arm on the Main panel.