Grass Valley Zodiak v.6.0 Mar 15 2006 - Manual (Page 264)

264 Zodiak — User Manual
Section 4 — Menus Overview
The Put button copies the contents of the enabled levels of the current effect
register to the specified register.
The Lock button locks the enabled levels of the specified register(s) or
bank(s) of registers, preventing them from being changed unless the lock is
removed.
The Unlock button unlocks the enabled levels of the specified register(s) or
bank(s) of registers.
The Clear button clears the data from the enabled levels of the specified reg-
ister(s) or bank(s).
The Clear Seq button clears the sequence link from the enabled levels of the
specified register(s) or bank(s).
Enable Groups
Like the Enable buttons on the Master E-MEM subpanel, the buttons in the
Enable Groups pane determine what levels will be affected by the function
activated (Get, Put, etc.).
Select All selects or deselects all the Enable buttons in the pane.
Number Keypad
The number keypad is used to enter register or bank numbers for an action,
which is completed by touching the
Enter button. Specific instructions are
displayed at the top of the keypad.
The keypad buttons available vary, depending on the function selected.
• When Get is selected, the Clear Reg (.) button can be used to clear the
current register, like the Get • Enter Main panel keystrokes ( Figure 185
on page 263 ).
• When Put is selected, the Next Empty (.) button can be used to select the
next empty register, like the Put • Enter Main panel keystrokes.
• When Lock , Unlock , Clear , or Clear Seq is selected, the Next , and Thru -
buttons can be used to select ranges of either registers or banks, as spec-
ified by the Input Mode above. The
Cur Reg + Enter button can also be
used to perform the function on the current register with a single key-
stroke, rather than specify the register number and press Enter
(
Figure 186 on page 265 ).