Grass Valley Zodiak v.6.0 Mar 15 2006 User Manual
Page 127
Zodiak — User Manual
127
2.5-M/E and 3-M/E Main Panel
For example, it is possible to delegate the Joystick to M/E 2 Key 1 and Key
2 where Key 1 has a Transform Engine and Key 2 does not. In this case, the
Key 1 button will be high tally but the Key 2 button will low tally.
Keyer Delegation Buttons
The four delegation buttons select a specific component of the delegated
M/E to be controlled by the
Joystick
from
Key 1–4
.
Pressing a single button
selects that button and deselects all others in that group. Pressing down
more than one delegation button at the same time delegates the Joystick to
control multiple objects simultaneously.
M/E Delegation Buttons
The
M/E 1-3
and
Global
buttons are used to delegate the
Joystick
to a particular
M/E bank or to the Global channel. This level of delegation is required for
all
Joystick
operations. Only one bank can be selected at a time (the buttons
are an interlocked group). The button of the current delegation goes high
tally.
Note
The Joystick is not used in the PGM/PST in a 2.5-M/E system.
Additional Delegation Buttons
Further Joystick delegation for a keyer or DPM channel is done with the
Int
DPM
,
Key Wipe
,
C1 Wipe and
and
C2
Wipe
buttons. The buttons in this group are
only active when M/E and Keyer delegation has been selected.
The
Int DPM
button delegates the key source (Transform Engine) for the
selected keyer.
The
Key Wipe
button delegates the simple wipe generator for the keyer.
The
C1 Wipe
button delegates the C1 complex wipe generator for the keyer.
The
C2 Wipe
button delegates the C2 complex wipe generator for the keyer.
Image and Pattern Modification Button Group
The top group of delegation buttons specify how the image or pattern is to
be modified. Not all selections in the group are valid for all delegations in
the above groups.
The
Locate 3D
button moves the image in 3D space.
The
Locate Size
button retains X and Y location but replaces Z location with
image size.
The
Spin
button permits X, Y, and Z spin of the image.
The
Src Space
button selects between Source and Target space delegation.