Grass Valley Zodiak v.6.0 Mar 15 2006 - Manual (Page 330)

330 Zodiak — User Manual
Section 4 — Menus Overview
intersection and stored as part of source memory. A different input on the
same bus or a same input on a different bus, may have different color cor-
rection.
The Color Corrector menu is used to adjust RGB color on a selected bus and
input. Touch
M/E , Color Corrector to access the menu ( Figure 232 ).
Figure 232. Color Correction Menu
The M/E pane button group selects the M/E, (for a 2-1/2 M/E switcher,
the button for M/E 3 disappears). The Bus data box group selects the bus
layer within the M/E. The data boxes for the Bus delegation contain
Red ,
Green , Blue , or ---. A color component in the data box indicates that color
correction is being applied to the component(s). For components not
enabled, the --- is shown as a place holder.
The Source pane is a non-editable text box that shows the Name of the
source currently selected on the crosspoints of the M/E and bus delegated
above. It is to this source and only on the delegated M/E and Bus that the
color correction will be applied.
The Color Corrector Transfer Function pane contains three data boxes
which serve as delegators. Each of these data boxes contains the Gain, Lift,
and Gamma values. The three oscilloscopes show the input to output
transfer characteristics of each color component's processor. They do not
show actual video.