Delta DVP-ES2 User Manual
Page 42
D V P - E S 2 / E X 2 / S S 2 / S A2 / S X 2 / S E O p e r a t i o n M a n u a l - P r o g r a m m i n g
Specifications
High-speed
I010, I020, I030, I040, I050, I060, I070, I080, 8
points
counter interrupt
Communication
I140(COM1), I150(COM2), I160(COM3), 3 points,
(*3)
interrupt
K-32,768 ~ K32,767 (16-bit operation),
K
Decimal
K-2,147,483,648 ~ K2,147,483,647 (32-bit
operation)
Constant
H0000 ~ HFFFF (16-bit operation),
H
Hexadecimal
H00000000 ~HFFFFFFFF (32-bit operation)
COM1: built-in RS-232 ((Master/Slave)
COM2: built-in RS-485 (Master/Slave)
Serial ports
COM3: built-in RS-485 (Master/Slave)
COM1 is typically the programming port.
Real Time Clock
Year, Month, Day, Week, Hours, Minutes, Seconds
Special I/O Modules
Up to 8 special I/O modules can be connected
Notes:
1. Non-latched area cannot be modified
2. Latched area cannot be modified
3. COM1: built-in RS232 port. COM2: built-in RS485 port. COM3: built-in RS-485 port
4. SA2 MPU occupies 16 input points (X0~X17) and 16 output points (Y0~Y17).
2-10