Delta DVP-ES2 - Manual (Page 161)

3 . I n s t r u c t i o n S e t
3 - 4 5
*1: Y1 is dual output. When M0 is OFF, it is controlled by M1. When M0 is ON, M12 will control Y1
*2: When timer that subroutine used (T184~T199) executes first and then CJ instruction is
executed, the timer will keep counting. After the timer reaches the set value, output contact of
timer will be ON.
*3: When high-speed counters (C235~C254) executes first and then CJ instruction is executed,
the counter will keep counting and its associated output status remains.
Y1 is a dual output. When M0 = OFF, Y1 is controlled by M1. M0 = ON, Y1 is controlled by M12.
CJ P0
M0
M1
M2
M4
M5
M6
M7
M10
M11
M0
M12
M13
END
RST T240
RST C0
RST D0
Y1
CJ P63
S1
TMR T0 K10
RST T240
RST C0
MOV D0 K3
CNT C0 K20
Y1
M20
TMR T240 K1000
P0
P63
M3