Echelon SmartServer 2.2 - Manual (Page 90)

SmartServer 2.2 User’s Guide 91
b. The LON Device Identification dialog opens. Press the service pin on your SmartServer,
click OK to return to the Setup – LON Router Driver Web page.
Service pin messages for the i.LON App (Internal) and i.LON NI (Internal) devices also
appear with the one for the Router (Internal) device if the Show Messages with Identical
Program ID Only check box is cleared. However, the Neuron ID of the IP-852 router is
selected by default because its program ID matches the one fetched from the IP-852 Router
device.
c. Click Submit.
7. Select Smart Network Management at the top of the Web page and then click Submit. This
automatically commissions the IP-852 router and starts the router application.