Echelon SmartServer 2.2 - Manual (Page 219)

220 Using the SmartServer as Network Management Tool
c. Click Yes to delete the external device only from the SmartServer’s internal database. Click
No to delete the external device from both the SmartServer’s internal database and the
OpenLNS network database to which the SmartServer is synchronized.
d. Remove the data points of the deleted external devices from the SmartServer’s built-in
applications. To do this, expand the application’s functional block in the SmartServer tree,
select one or more data point references ( ) to be deleted, right-click a data point reference,
select Delete on the shortcut menu, and then click Submit.
3. Decommission the SmartServer, the SmartServer’s IP-852 router, and any commissioned internal
FPM devices in the current OpenLNS network database with OpenLNS CT or other OpenLNS
application.
4. Commission the SmartServer in the new or existing OpenLNS network database with OpenLNS
CT or other OpenLNS application.
Note: The name of the channel on which the SmartServer is installed in the OpenLNS CT
drawing must match that of the SmartServer’s current parent channel in the SmartServer Web
interface; otherwise, the synchronization process may corrupt your OpenLNS CT network design.
For example, if the SmartServer’s internal automated systems device (i.LON App, iLON
SmartServer- 1, or some other user-defined name) is located under Channel 1 in the navigation