Echelon SmartServer 2.2 - Manual (Page 518)

SmartServer 2.2 User’s Guide 519
To update the bootrom, follow these steps:
1. Reboot the SmartServer using the console application. When the console reads “Press the
‘!’ key to stop auto-boot ”, press ‘!’. The SmartServer will reboot to the bootrom
state, halting all applications.
2. Upload via FTP the updated bootrom.upd file to the root directory of your SmartServer.
3. Enter the update bootrom command in the console application. If the bootrom file name is
different than the default (bootrom.upd), specify the actual file name as an additional parameter.
4. After the bootrom update has been completed, reboot your SmartServer.
Note: Do not interrupt the bootrom update process. Doing so will render the SmartServer unable to
boot. If this happens, you will need to ship your SmartServer back to Echelon to be repaired.