Installing a bacnet interface – Echelon SmartServer 2.2 User Manual
Page 34
SmartServer
2.2 User’s Guide
35
7. Click Finish.
8. If you installed the NodeBuilder Resource Editor on a computer that has not had any other
Echelon software previously installed on it, you need to register the Echelon resource files in the
resource catalog. To do this, follow these steps:
a. Start the NodeBuilder Resource Editor. To do this, click Start, point to Programs, point to
Echelon NodeBuilder Resources, and then click NodeBuilder Resource Editor. The
Echelon NodeBuilder Resource Editor opens
b. Click File, and then select Add Folder.
c. Browse to the C:\Lonworks\types\user\echelon directory, and then click OK.
d. Click File, and then select Refresh Catalog.
Installing a BACnet Interface
You can purchase and install a BACnet interface for the SmartServer. The BACnet interface is a
custom app for the SmartServer provided by ConnectEx, Inc. It provides an interface that is
compatible with all common BACnet AWS/OWS workstations. For more information on the BACnet
interface for the SmartServer, con