Echelon SmartServer 2.2 - Manual (Page 116)

SmartServer 2.2 User’s Guide 117
management, monitoring, and control features provided by the SmartServer, and it enables you take
advantage of the SmartServer’s increased memory and improved performance.
1. Install the SmartServer 2.2 software from the SmartServer 2.2 DVD as described in Installing
Echelon SmartServer 2.2 Software in Chapter 2. This installs the latest SmartServer 1.0 and
SmartServer 2.2 images to the LonWorks\iLon100\images folder on your computer.
2. Install Echelon Enterprise Services 2.2 and OpenLNS Server from the SmartServer 2.2 DVD. See
Chapter 1 of the Echelon Enterprise Services 2.2 User’s Guide for more information.
3. Backup the i.LON 100 e3 Server via FTP. To do this follow these steps:
a. Verify that you have the correct user name and password to access your i.LON 100 e3 Server
via FTP and that FTP access is enabled on your i.LON e3 Server. To do this, follow these
steps:
i. Click Setup and then click Security. The Setup – Security Web page opens.
ii. Under Property, verify that the FTP/Telnet User Name and FTP/Telnet Password
properties are correct.
iii. Under Service, verify that the Enable FTP check box is selected.
b. In the browser of an FTP client such as Core FPT, WS FTP Pro, and Cute FTP, enter the FTP
URL of your i.LON 100 e3 Server (ftp://192.168.1.222, for example).
c. Enter the FTP/Telnet user name and password for accessing your i.LON 100 e3 Server via
FTP.
d. Copy all the folders in the root directory of the i.LON 100 e3 Server flash disk except for the
alarmLog and data folders to the local drive of your computer, a USB drive, another
removable media, or a shared network drive with read/write permissions. If you copy Data
Logger and Alarm Notifier log files to the SmartServer flash disk, the SmartServer will
replace them with empty files.
4. Verify that you have the correct user name and password to access your SmartServer via FTP and
that FTP access is enabled on your SmartServer. To do this, follow these steps:
a. Right-click the local SmartServer icon, point to Setup, and then click Security on the shortcut
menu. Alternatively, you can click Setup and then click Security. The Setup – Security
Web page opens.
b. In the General property, verify that the FTP/Telnet User Name and FTP/Telnet Password
properties are correct.
c. In the Service property, verify that the Enable FTP check box is selected.
5. Format the SmartServer flash disk and then downgrade the firmware to the latest SmartServer 1.0
firmware image (Release 4.02) to preserve the configurations of the NVEs and built-in
applications (for example, Scheduler and Data Logger) on your i.LON 100 e3 Server. The
SmartServer 1.0 firmware image is installed on your computer when you installed the SmartServer
2.2 software as described in step 1.
To format your SmartServer and then downgrade to the SmartServer 1.0 firmware image, follow
these steps:
a. Connect a serial cable between your computer and the i.LON 100 e3 plus Server console port.
b. Start a terminal emulator such as PuTTY. Set the serial interface settings to 9600 bps, 8 bits,
no parity, 1 stop bit, and no flow control. See Appendix B, Using the SmartServer Console
Application, for more information on the console interface.
c. Enter the reboot command in the SmartServer console application.