Echelon SmartServer 2.2 User Manual
Page 106
SmartServer
2.2 User’s Guide
107
LonTalk Statistics
If you are using the SmartServer as an IP-852 router, the following
properties display the total number and rate (per second) of packets sent
and received on the LON and LON IP sides of the IP-852 channel since
the SmartServer began operating as an IP-852 router.
If “Not Licensed” appears in all the fields, an IP-852 routing license is not
installed on your SmartServer. You can click any of the Not Licensed
links in this section to activate IP-852 routing on your SmartServer.
Alternatively, you can order an IP-852 routing license (Echelon model
number 72160) from the Echelon Web site at
LonTalk-Side
Packets Sent
Packets transmitted from the SmartServer’s internal LON channel to its
IP-852 router.
LonTalk-Side
Packets Received
Packets received on the SmartServer’s internal LON channel from its
IP-852 router.
LonTalk-Side
Packets Lost
Packets received from the IP-852 router that were lost on the
SmartServer’s internal LON channel.
IP-Side Packets
Sent
Packets the SmartServer has transmitted from its IP-852 router to the
IP-852 channel.
IP-Side Packets
Received
Packets the SmartServer’s IP-852 router has received from the IP-852
channel.
IP Packets Data
Stale
Expired packets received by the SmartServer’s IP-852 router from the
IP-852 channel.
IP Configuration
Packets Sent
Packets sent by the SmartServer’s IP-852 router to the IP-852
Configuration Server on the IP-852 channel.
IP Configuration
Packets Received
Packets received by the SmartServer’s IP-852 router from the IP-852
Configuration Server on the IP-852 channel.
Seconds Since Last
Clear
Total number of seconds that have elapsed since the SmartServer was last
rebooted.
Seconds Since Last
Clear
Displays when the SmartServer was last rebooted.
Last Refresh
Displays when you last refreshed your browser.
Custom App
(FPM) Information
This section indicates whether you can deploy and run custom apps—also
called Freely Programmable Modules (FPMs)— on your SmartServer. A
custom app is a custom embedded application or driver that customizes
the functionality of your SmartServer.
You can create custom apps with the Echelon i.LON Programming Tools.
A trial version of the SmartServer 2.0 Programming Tools is available on
the SmartServer 2.2 DVD. To build custom apps and upload them to your
SmartServer, you need to order the SmartServer 2.0 Programming Tools
DVD (Echelon model number 72111-409). To order this DVD, contact
your Echelon sales representative.
For more information on writing and deploying custom apps, see the
SmartServer 2.0 Programming Tools User’s Guide.