Echelon SmartServer 2.2 - Manual (Page 249)

250 Using the SmartServer as Network Management Tool
Configuring L
ON
W
ORKS
Routers
You can use the driver properties to install, configure, and test routers. To configure the properties of
a router, follow these steps:
1. Click Driver.
2. Select one or more routers to configure.

To configure one router, click the router. Alternatively, you can right-click the router and
select Properties on the shortcut menu.

To configure two or more routers, click one router and then either hold down CTRL and click
all other routers to be configured or hold down SHIFT and select another router to configure
the entire range of routers. Alternatively, you can select multiple routers, right-click one of
the selected routers, and then click Properties on the shortcut menu.
3. The Setup – LON Router Driver Web page opens.
4. Configure the following router properties:
Name Displays the network path of the router in the following format:
<network>/<channel>/<router>. This field is read-only.
Handle Displays the handle of the channel assigned by the OpenLNS Server. This
field is read-only.
Description Enter an optional description of the router. This description has no effect
on network operation, but you can use it to provide additional
documentation for as-built reports.