Echelon SmartServer 2.2 - Manual (Page 79)

80 Configuring and Managing the SmartServer
SmartServer’s Web server before the transaction is canceled and a timeout error is thrown. By
default, the connection timeout is 2 seconds if this option is cleared. If you select this option, the
default timeout is 120 seconds.
5. Click Submit. The server icon in the tree is updated with the IP address or hostname you entered.
6. Right-click the new server icon, point to Add Service, then and click IP-852 Configuration
Server on the shortcut menu.
7. The IP-852 Configuration Server Property Web page opens. Enter the port used by the IP-852
Configuration Server to receive messages form the SmartServer in the IP-852 Configuration
Server Port box. The default port is 1629.
8. Click Submit to save the changes.
To delete an IP-852 Configuration Server, right-click the generic server icon if the sever is used
exclusively for the IP-852 Configuration Server, or right-click the IP-852 Configuration Server icon if
the server is used for other services, click Delete on the shortcut menu, and then click Submit.
Adding a Web Connection Target Server to the LAN
You can add a Web Connection Target server (a Web server that can process SOAP requests) to the
LAN. This enables you to create Web connections between the local SmartServer and the Web
Connection target, which are referred to enterprise connections. With enterprise connections, you can
send data logs, alarm logs, event scheduler logs, or any user-defined file from your local SmartServer