Echelon SmartServer 2.2 - Manual (Page 473)

474 Using Type Translators
e. Select an output point (to the right of the TO operator) from the list.
f. If the output point is a structured data point, select a field from the list to be written to by the
input point.
g. Click Submit.
6. You can create a new case to the current translation or add another IF-THEN statement to the
current case by adding a case or statement or copying an existing one. You can copy an existing
method to create more complex rule-based translations. The method you choose depends on
whether you want to re-use the previous case or IF-THEN statement.

To create a new case in the current translation by re-using a previous case, right-click the
top-level IF-THEN statement, click Copy on the shortcut menu, right-click the top-level
IF-THEN statement again, and then click Paste on the shortcut menu. You can use this
method to copy and re-use any case.

To create a new case in the current translation without re-using a previous one, right-click the
top-level IF-THEN statement and then click Add on the shortcut menu.