Echelon SmartServer 2.2 User Manual
Page 80
SmartServer
2.2 User’s Guide
81
to a central enterprise system. For more information on creating and using Web connections, see
Creating Web Connections in Chapter 4, Using the SmartServer Web Interface.
To add a Web Connection Target server to the LAN, follow these steps:
1. Right-click the LAN icon or a dial-out connection icon, point to Add Host, and then click Server
(LNS, Email, Time, IP-852, WebTarget) on the shortcut menu, or if are you adding the Web
Connection Target to an existing server on the LAN, skip to step 4.
2. The Setup – Host Web page opens, and a server icon is added one level below the LAN icon at
the bottom of the navigation pane or one level below the dial-out connection icon.
3. Enter the IP address or hostname of the Web Connection Target server and then click Submit.
The server icon in the tree is updated with the IP address or hostname you entered.
4. Right-click the server icon, point to Add Service, then and click Web Connection Target on the
shortcut menu.