Echelon SmartServer 2.2 - Manual (Page 399)

400 Scheduling
Note: To account for weekday holidays in this example, create an exception group that includes all
such holidays. The exception group requires a priority of 205 (a priority that is higher than that of the
Peak Time Schedule, but lower than that of the Day Schedule) so that it can prevent the Peak Time
Schedule from brightening the lights to 100% at the normal peak time times, yet allow the Day
Schedule to turn off the lights. The schedule used by the exception group is a copy of the Peak Time
Schedule—but has ON_60 events in the place of the ON_100 events in the Peak Time Schedule.
Creating the Night Schedule
The Night Schedule turns on the luminaire and sets it to 60%, and it dims the luminaire from 100% to
60%. To create a Night Schedule, create an exception schedule with a single event as follows:
1. Create an ON_60 event that is scheduled at sundown with a 220 priority. The time at which this
event actually executes depends on when the end of the evening peak time occurs. This is because