Echelon SmartServer 2.2 User Manual
Page 161
162
Using the SmartServer Web Interface
d. Select Neuron ID. This enables the SmartServer to automatically acquire the Neuron ID of
devices created from the device template using device discovery.
e. Select Smart Network Management at the top of the Web page. This sets the network
management commands required to commission the device and set it online.
f.
Click Submit.
Note: When you save your device as a template, clear Clear from Template in the Network
Management property as described in step 7. This saves the network management
commands you set in steps c-d in the device template. These network management
commands will be executed when new devices created from the device template are
instantiated.
2. Configure the general and driver properties of the device’s data points. For example, you can set
the data points’ default values, persistent flags unit strings, and presets in the general properties,
and you can set their poll rates in the driver properties. See Configuring L
in Chapter 5 for more information on setting these properties. The data points of the subsequent
devices you add to the SmartServer using the device template will have the same property values
by default
3. Right-click the device to be saved to a template and then click Save as Template on the shortcut
menu.
4. The Save As Template dialog opens.