Echelon SmartServer 2.2 - Manual (Page 444)

SmartServer 2.2 User’s Guide 445
3. The Configure – Digital Output Web page opens.
4. The Digital Output functional block contains the following two data points:

nviClaValue (SNVT_switch). Drives the relay of the digital output hardware.

nvoClaValueFB (SNVT_switch). Indicates the last value sent to the nviClsValue data
point. It is used to synchronize a group of digital output devices.
5. Select how the state of the nviClaValue input data point is translated to the dry contact relay
outputs.