Echelon SmartServer 2.2 - Manual (Page 488)

SmartServer 2.2 User’s Guide 489
5. Enter the IP address or hostname of the SmartServer in the TCP/IP Address or host name box.
If you have configured the SmartServer to use a port other than 80, you must specify the port with
the IP address. For example, to specify port 8080 if your SmartServer has an IP address of
172.25.130.18, you would enter 172.25.130.18:8080.
6. Select Use SOAP Authentication and enter the Username and Password for your SmartServer
to enable authentication for SOAP messages sent to and from your SmartServer. The Username
and Password both default to ilon.
7. Click OK. The SmartServer Web interface opens in a new browser, a functional block icon
representing the application is added to the SmartServer’s App device in the navigation pane, and
the selected SmartServer application opens in the application frame to the right. The same
browser will be used each time you open a SmartServer application using OpenLNS CT.